Unlike conventional systems, the doors are set back from the leading edge of a 2100mm high partition, creating a greater sense of seclusion and providing a unique style to your washroom.

Pilasters are actually full height continuous door stops fabricated from stainless steel with Optisheen true polish.

These angle profiles have fully radiused edges that complement the leading edge of the pilaster bullnose and add a tactile element to the design.

Partitions are manufactured from 25mm moisture resistant chipboard faced on both sides with either high pressure laminate or real wood veneer.

The leading edge is fully radiused to form a bullnose profile along its entire height which provides an attractive & effective counter to knocks.

In wet areas SGL may also be used and is subject to minor modifications to the overall cubicle detailing & dimensions.

Doors can be manufactured from the following materials to suit your requirements.

Truline cubicles can be supplied in configurations to comply with DDA & part M of the latest building regulations.

Due to the fixed nature of the cubicle's unique partition/ pilaster detail, care should be taken when laying out your design to ensure compliance with the 450mm diameter maneuvering space stipulated by the current Building regulations.