" slimline pilasters for a minimalist appearance "
inima integrates the modern look of slimline pilasters with the lustrous effect of satin polished stainless steel.
Appearance is crucial and no other material looks quite as good as actual stainless steel which is used to form the exclusive Minima pilaster, headrail and hardware.
Pilasters are a composite 'T' shape manufactured from stainless steel with Optisheen true polish.
The front section (outside facing) is made as thin as possible (max 3mm) will both leading edges fully radiused.
The doors are fixed to the rear box section to produce the desired 'in line' appearance of this system.
Doors & partitions can be manufactured from any of the following materials in any combination to suit your requirements.
- available in any configuration with inward or outward opening doors.
Wet & dry changing cubicles*
- can be provided with integral bench seating and if preferred, with curtains in lieu of doors.
Shower cubicles*
- available in any configuration with inward or outward opening doors, or curtains if required.
Modesty screens
- available to match where additional privacy is required.
* - material restrictions apply as denoted by
Minima cubicles can be supplied in configurations to comply with the latest DDA regulations.
Due to the slim nature of the cubicle's defining pilaster, care should be taken whilst laying out your design so that the swing of inward opening doors does not encroach on the required maneuvering space.
If oversize cubicles are required, a 'dual' pilaster and infill panel maybe needed to maintain a minimum door swing.
For more information regarding compliance with DDA & Part M of the current Building Regulations, please read the guide to compliant washroom design
Door furniture & fittings
Standard Dimensions
Height
2000mm
Depth
1520-2100mm
Width
750-900mm
Ground clearance
100mm
Cubicles dimensions are set out to permit optimum material usage whilst remaining compliant with current building regulations.
